Electrolux EWW14012 User Manual download pdf (Page 11)

ENGLISH 11

3.12 Vapour Touchpad

3.11 Prewash Touchpad

3.14 Rinse Plus Option

This option is recommended for

people who are allergic to

detergents, and in areas where the

water is very soft.

To activate this option, press ‘Dry

Time’ and ‘Prewash’ touchpads at

the same time until the display

shows the symbol ‘ ’.

To deactivate this option, press

‘Dry Time’ and ‘Prewash’

touchpads at the same time

until the symbol ‘ ’ goes off.

* Vapour option cannot be

selected, if drying option

has been combined with

the program.

3.13 Start/Pause Touchpad

To start the selected program, press

the ‘Start/Pause’.

To interrupt a program which is

running, press the ‘Start/Pause’ to

pause the machine.

To restart the program from the point

at which it was interrupted, press the

‘Start/Pause’ again.

If you have chosen a delayed start,

after pressing ‘Start/Pause’ the

machine will begin the countdown.

Select this option if you wish your

laundry to be pre-washed before the

main wash. Use this option for heavy

soil.

The indicator of this option comes on.

When you set this function, put the

detergent into the “ ”

compartment. (Refer page 18-19)

This function increases the program

duration.

Select this option* to add approxi-

mately 15-40 minutes of tumbling

in vapour during the wash cycle.

Vapour helps open fabric fibers up

to allow laundry additives to

release tough stains.

The indicator of this option comes on.

Vapour may not necessarily be

visible inside the drum during a

vapour wash cycle. Vapour is

created below the drum and

allowed to naturally rise into the

clothes.

NOTE:

At the end of the Vapour cycle the

clothes will be warmer, softer and

detached from the drum.

If Vapour option is selected,

rinse temperatures will be

elevated.

During a vapour cycle you may

notice vapour exiting from the

drain hose of the washer-dryer,

this is normal and there is no

cause for alarm.

Vapour may not be present during

the entire vapour wash cycle.

Vapour function is more effective

with half load.

Dryness levels settings are

based on wash program

selected.

During the last minutes of the

drying cycle the appliance

performs the anti-crease and

the cooling phases.

-

-

-

The time value on the display

is the duration of the washing

+ drying cycles, calculated on

a default load size.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 111 112

Comments to this Manuals

No comments