Electrolux EWW147472W User Manual download pdf (Page 28)

INSTALLATION

UNPACKING

All transit bolts and packing must be re-

moved before using the appliance.

You are advised to keep all transit devices

so that they can be refitted if the machine

ever has to be transported again.

1. After removing all the packaging, care-

fully lay machine on it’s back to remove

the polystyrene base from the bottom.

2. Remove the power supply cable and

the draining hose from the hose holders

on the rear of the appliance.

3. Unscrew the three bolts.

1

2

4. Slide out the relevant plastic spacers.

5. Open the porthole. Remove the poly-

styrene block fitted on the door seal.

Remove from the drum the objects

supplied with the machine.

6. Fill the smaller upper hole and the two

large ones with the corresponding plas-

tic plug caps supplied in the bag con-

taining the instruction booklet.

POSITIONING

Install the machine on a flat hard floor.

Make sure that air circulation around the

machine is not impeded by carpets, rugs

etc. Check that the machine does not

touch the wall or other kitchen units. Level

the washing machine by raising or lowering

the feet. The feet may be tight to adjust as

they incorporate a self locking nut, but the

machine MUST be level and stable. If nec-

28 electrolux

1 2 ... 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments