Electrolux Kelvinator Heat Pump Hot Water System User Manual Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 12
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
4 important safety instructions Kelvinator solar hot water systems
warning
Important safety instructions for gas boosted systems
If you smell gas or smoke coming from the hot water
system:
Do not try to light the hot water system
Do not touch any electric switches
Do not use any phone in your building
Isolate the power at the main switchboard
Check and isolate the main gas valve
Immediately call your gas supplier from a neighbour's
phone. Follow the gas supplier's instructions
If you cannot reach the gas supplier, call the
fire department
FLAMMABLES
FLAMMABLE VAPOURS
Do not try to light the burner manually. It is equipped with
an electronic ignition device which automatically lights
the burner.
Open the main gas supply valve to the unit using only
your hand to avoid any spark. Never use tools. If the knob
will not turn by hand do not try to force it, call a qualified
service technician. Forcing the valve may result in re or
explosion due to gas leaks.
Please refer to the User Manual supplied with the gas
continuous flow hot water system for more specific safety and
operating instructions.
Ensure the following safety instructions are read and
understood before using this hot water system.
warning
Water temperatures above 50°C can cause severe burns,
scalding or death. Feel the water temperature before
bathing or showering. Do not leave children unsupervised.
Under AS/NZS 3500 the temperature of the hot water
being delivered must not exceed 50°C at any outlets used
primarily for purposes of personal hygiene. To comply with
these standards, a tempering valve must be fitted to the
hot water system.
warning
For continued safety of this appliance it must be installed,
operated and maintained in accordance with the
manufacturers instructions.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge unless they have been given supervision
or instruction concerning the use of the appliance by a
person responsible for their safety. Children should be
supervised to ensure that they do not play with
the appliance.
Do not use this hot water system if it has at any stage
been immersed in water. Immediately call a licensed
plumber, gas fitter or authorised technician to inspect
and/or service the system.
Do not disconnect the electrical supply if the ambient
temperature drops below freezing. The Freeze Protection
System only works when the hot water system is
connected to the power.
In order to avoid electric shock, re or injury, if any
abnormality is detected, such as the smell of smoke
coming from the hot water system, isolate the power at
the main switchboard then contact your local Electrolux
Customer Care Centre.
Never use a ammable spray such as hair spray or lacquer
paint near the hot water system as it may cause a fire.
The operation of the thermal cut-out on the hot water
storage tank indicates a possibly dangerous situation
(electric boosted installations only). Do not reset the
thermal cut-out until the hot water system has been
serviced by a qualified person.
caution
Do not use this hot water system for any other purposes.
Do not place items which may be damaged by moisture
around the hot water system or near the drain outlets.
Water may drip from the discharge pipe of the
pressure relief valve. This pipe must be left open to the
atmosphere at all times.
The pressure relief device is to be operated regularly to
remove lime deposits and verify that it is not blocked.
Important safety instructions
Page view 3
1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments