Electrolux U32091 S 70170 User Manual download pdf (Page 9)

Installation

Your Refrigerator Needs Air

For correct operation this

appliance must be located in a

dry atmosphere, away from

heat sources, e.g. cookers,

radiators, boilers and direct

sunlight.

You should also ensure that air

can circulate freely around the

back and the top of the

cabinet. There should be

100mm (4”) between the top of

the cabinet and any

overhanging kitchen furniture.

Alternatively allow 50mm (2”) between the top of the cabinet and any

overhanging kitchen furniture and a gap of 25mm (1”) on either side of the

appliance.

Levelling

The appliance must be level.

Level the appliance by adjusting

the two adjustable feet (1) at

the front of the appliance.

If required the washer (2) can be

removed.

Reversing the Door

The side at which the door opens can be changed from the right side (as

supplied) to the left side, if the installation site requires.

Warning! When changing the

side at which the door opens,

the appliance must not be

connected to the mains.

Remove plug from the mains

beforehand.

Carefully tilt the appliance to

the back and place an adequate

object under it.

Take care to avoid the

compressor or the condenser

touching the ground.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

No comments

Electrolux U32091 S 70170 User Manual Page 9