Electrolux EFC 630 User Manual download pdf (Page 11)

11

INSTALLING THE COOKER HOOD

Please ensure that when the appliance is

installed it is easily accessible to an

engineer in the event of a breakdown.

All installations must comply with the

local authorities requirements for the

discharge of exhaust air.

Incorrect installation may affect the

safety of this cooker hood.

Installation Requirements

Before installation check the wall to

which the cooker hood is to be fitted for

electric cables, water pipes or gas.

This cooker hood is designed to be fixed to

any rigid vertical surface over a cooking area,

and can be used in the extraction (ducted to

the outside) or recirculation mode.

The installation work must be undertaken by a

qualified and competent person. The

manufacturer disclaims any responsability for

damage due to incorrect installation of the

cooker hood or if the hood is not installed in

compliance with relevant regulations

controlling this type of installation.

Unpacking

The EFC630 is supplied with the following

components for installation:

•

Canopy (C), including controls, worktop

illumination and fan unit.

• U-shaped upper chimney section (S)

• U-shaped lower chimney section (I)

• Recirculation grilles (G)

• Reduction flange 150-120mm dia (K)

• Recirculation spigot (R)

• Wall fixing brackets for (1)

• Wall fixing brackets for (2)

• Rawl plugs

• Fixing screws

• 120-125mm ducting collar

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Comments to this Manuals

No comments