USER MANUALEFC90245X
10GUARANTEE CONDITIONSWe Electrolux, undertake that if within 12 months of the date of the purchase this Electrolux built-in appliance or any part the
11INSTALLATION INSTRUCTIONS It is dangerous to alter the specications or attempt to modify this product in any way.Technical InformationDIMENSIONS
12INSTALLING THE COOKER HOODPlease ensure that when the appliance is installed it is easily accessible to an engineer in the event of a breakdown. Al
13 Fitting the Wall BracketsWall marking:• Draw a vertical line on the supporting wall up to the ceiling, or as high as practica
14 Fitting the Hood Body Before starting to x the hood body, tighten the two screws Vr located on the top of the hood body. Hook the hood body ont
15ExtractionThe charcoal lter is not required in this mode and should be removed. DuctingThe ducting used must be Ø150mm or Ø120mm in diameter. If p
16 Fitting the Chimney StackThe chimney consists of two sections. The lower chimney measures 740mm and the upper chimney (with the recirculation gri
For general enquiries concerning your Electrolux applianceor for further information on Electrolux products, please
We were thinking of youwhen we made this product
www.electrolux.com436005302_01 - 110125
3Thank you for buying a Electrolux product.To enable you to use your appliance effectively and safely, please read this instruction book carefully bef
4IMPORTANT SAFETY INFORMATIONThese warnings are provided in the interests of your safety. Ensure that you understand them all before installing or usi
5YOUR APPLIANCEOPERATING INSTRUCTIONSThis cooker hood is designed to extract unpleasant odours from the kitchen, it will not extract steam. Cook
6To OperateSelect the required fan speed and light if required.RecirculationIn the recirculation mode the contaminated air entersthe cooker hood thro
7 Before carrying out any maintenance or cleaning isolate the cooker hood from the mains supply. The cooker hood must be kept clean, as a build up o
8 Position the new charcoal lter in the position marked and while holding the lter replace the xing hooks as illustrated. This appliance can be
9SOMETHING NOT WORKINGSERVICE AND SPARE PARTSIf, having followed these instructions carefully, your cooker hood fails to work properly please carry ou
Comments to this Manuals