Electrolux EI24ID81SS User Manual download pdf

[DF09a]

GENERAL TOLERANCES

A 1

This drawing contains confidential

information

and is the property of

Electrolux, without whose permission it may

not be copied, shown or handed to a

third

party or otherwise used and it is to be

returned promptly upon request to the design

owner, who is responsible for the drawing.

Components reflected by this drawing must conform in all

respects with Electrolux 'Restricted Materials List' as

published on www.electrolux.com/rml as well with all other

applicable legal

requirements. Upon request documentation

demonstrating compliance with these requirements shall be

immediately

provided by the supplier to Electrolux.

MATERIAL

TREATMENT

DESIGN OWNER

1st ANGLE

PROJECTION

REV.

DERIVED FROM

REPLACES

DRAWING NUMBER

WEIGHT/VOLUME

DRAWN BY

SCALE

MODEL/APPLICATION

NAME

SUPPLY SPECIFICATIONS

DATE

SHEET

DESCRIPTION

LOCAL NAME

APPROVED BY

REV. MODIFICATIONS DRAWN BY ECN

DATE

VARIANT NUMBER REV. REPLACED NUMBER

MODEL/APPLICATION DESIGN USERS DESCRIPTION

808936683

1:1

DW DURHAM

ELECTROLUX EI24ID81SS

DW DURHAM

ELECTROLUX

EI24ID81SS

VALSESIL

DISH CARE

FIRST DISTRIBUTION001

1/2

001

PARTICULAR SHOWN AS DRAWING

G0012522

NOTES

- THE SILK SCREEN SURFACE

FRONT/REAR

CORRESPONDING TO

TABLE TECNICAL AESTHETIC COMPONENT SPECIFICATION CD.

CSS3047

- THE PACKAGING METHOD MUST ENSURE THAT THE EXTERNALSURFACES REMAIN

UNDAMAGED IN ANY WAY ( SCRATCHING, DENTS, ETC...)

- GENERAL TOLERANCE ON

GRAPHICS

± 0,3

IF NOT INDICATED DIFFERENTLY

SIZE A3

RECYCLE PAPER 80 gr/m

2016-06-22

SERVICE DATA SHEET

BLACK

GRAPHICS

COLOURS

CHARACTERISTICS

Cycle

Selection Options

SERVICE DATA SHEET

P/N: 808936683

This information is intended for use by

persons having electrical and

mechanical training and a level of

knowledge of these subjects generally

considered acceptable in the appliance

repair trade. Electrolux Home Products

North America cannot be responsible,

nor assume any liability, for injury or

damage of any kind arising from the

use of this Service Data Sheet.

Wiring Diagram

Service Mode

Cycle Selection Options

EI 24ID81

165

155

160

135

140

145

150

105

110

115

120

125

130

100

Minutes

Dispenser

Stemware

PreWash1

PreWash2

HotRinse

MainWash

Inlet Valve

Circulation Pump

Drain PumpDrain Pump

Heater

Dry

Heater

Eco

PW1

PW2

ColdRinse2

Heavy

PW1

PW2

PreWash3

ColdRinse1

ColdRinse2

Dispenser

Dry

Dispenser

Dry

Heater

Line Test

MainWash2

MainWash 1

Fast

HotRinse

Rinse

PreWash1

PreWash2

Dispenser

Minutes

Dispenser

Minutes

ColdRinse

Dry

HotRinse

Minutes

Dry

PreWash

MainWash

PW4

PreWash3

MainWash

ColdRinse1

HotRinse

MainWash

Heater

Dispenser

Upper

Dispenser

PW1

PW2

HotRinse

Heater

Normal/Auto

MainWash

Normal Cycle (with light soil)

After Cancel, press pad Heavy and Fast simultaneously for

at least 4 seconds to access Service Mode.

LED Auto, Led Heavy and Led Normal blink to indicate

that Service mode is accesed.

After accessed Service mode ( Led Auto, Led Heavy and

Led Normal blinking):

1. Press pad Auto to show the first alarm code.

- Led Auto blinks to indicate the machine is in Alarm

Reading.

- The first alarm code saved is shown in the display. For

descriptions of alarm codes, please see Alarm Codes

section.

2. Press pad Auto again to show the second alarm code.

3. Press pad Auto once more to show the third alarm

code.

4. Press pad Auto the fourth time to move to Actuator Test.

Press pad repeatedly will sequentially turn on one

actuator at a time.

- Led Auto is turned off. led Heavy blincks to indicate the

machine is in Actuator Test.

- The actuator number is shown in the display, see the follo-

wing table for details.

Number of

pad Heavy

pressed

Actuator

Number

in display

Actuator

Regeneration Valve

Drain Pump

Inlet Valve

Heater

Wash pump

Dispenser

Dry Fan

5. Press pad Auto when actuator number 10 is activated,

the machine will cycle back to Alarm reading and show

the first alarm code saved.

6. The mode can be exit by pressing the CANCEL button,

or waiting 60 seconds after last button pressing.

LED Test/Delete Alarm Memory

After accessed Service mode ( Led Auto, Led Heavy and

Led Normal blinking):

1. Press pad Heavy to start this function.

- All LEDS and display blinks 5 seconds on 1 second off.

- Buzzer beeps 5 seconds and then off.

- The alarm codes saved in memory are erased.

2. The mode can be exit by pressing the CANCEL button,

or waiting 60 seconds after last button pressing.

Functional Test cycle

After accessed Service mode (Led Auto, Led Heavy and

Led Normal blinking):

1. Press pad Normal to start the test cycle.The cycle will not

start if door is opened.

- LED Normal blinks all the way through the whole cycle,

even if after the cycle is finished

The test cycle runs as a normal wash cycle.

It can be cancelled or run to its end.

Cycles may differ in behaviour from presentation above due to the dependence of turbidity,

temperature and user input. E.g. Less/more phases; shorter/longer duration.

Inlet Valve

Circulation Pump

Inlet Valve

Circulation Pump

Drain Pump

Inlet Valve

Circulation Pump

Inlet Valve

Circulation Pump

Drain Pump

Inlet Valve

Circulation Pump

Inlet Valve

Circulation Pump

Drain Pump

Inlet Valve

Circulation Pump

Inlet Valve

Circulation Pump

Drain Pump

Inlet Valve

Circulation Pump

Inlet Valve

Circulation Pump

Drain Pump

Inlet Valve

Circ. Pump

Drain Pump

Inlet Valve

Circ. Pump

Drain Pump

1 2

SERVICE DATA SHEET 1
G0012522 2

Summary of Contents

Page 1 - SERVICE DATA SHEET

[DF09a]GENERAL TOLERANCESA 1This drawing contains confidential information and is the property of Electrolux, without whose permission it may not be c

Page 2 - G0012522

[DF09a]GENERAL TOLERANCESA 1This drawing contains confidential information and is the property of Electrolux, without whose permission it may not be c