Electrolux ESF43010 User Manual download pdf (Page 30)

Proceed as follows:

• Remove the machine’s worktop by

unscrewing the two rear retaining

screws (1), pull the worktop from the

back of the machine (2) and slide out

the front slots, lifting the worktop (3).

Insert the machine after adjusting the

levelling with the adjustable feet. When

inserting the machine, ensure that the

water inlet and drain hoses are not

kinked or squashed.

During all operations that involve

accessibility to internal components the

dishwasher has to be unplugged.

Be sure that once the appliance has

been installed, it is easily accessible for

the service engineer in the event that a

repair is required.

If the dishwasher is later used as a free-

standing appliance, the original worktop

must be re-mounted.

The plinth on free-standing appliances is

not adjustable.

Levelling

Good levelling is essential for correct

closure and sealing of the door.

When the appliance is correctly levelled,

the door will not catch on either side of

the cabinet .

If the door does not close correctly,

loosen or tighten the adjustable feet until

the machine is perfectly level.

Water connection

Water supply connection

This dishwasher may be fed with either

hot (max. 60°) or cold water. Neverthe-

less we advise you use a cold water

supply.

A hot water supply is not always efficient

with heavily soiled crockery as it short-

ens the washing programmes a lot.

For making the connection itself, the

coupling nut fitted to the machine’s sup-

ply hose is designed to screw onto a

3/4" gas thread spout or to a purpose

made quick-coupling tap such as the

Press-block.

The water pressure must be within the

limits given in the "Technical data". Your

local Water Authority will advise you on

the average mains pressure in your area.

30 electrolux water connection

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments