Electrolux ESL43020 User Manual download pdf (Page 6)

'Select and start a washing pro-

gramme'.

Audible signals

You can hear the audible signals when:

• The washing programme ends.

• The appliance has a malfunction.

Do these steps to deactivate the audible

signals:

1. Switch on the appliance.

2. Make sure that the appliance is in setting

mode.

3. Press and hold the programme button

until the programme light A flashes and

the programme light B comes on.

4. When the programme light A flashes and

the programme light B comes on, press

immediately the programme button

again.

The programme light A comes on and the

programme light B starts to flash.

After some seconds the programme light

A goes off and the end-of-programme in-

dicator light comes on. (The programme

light B continues to flash).

– The audible signals are active.

5. Press the programme button again. The

end-of-programme indicator light goes

off.

– The audible signals are deactivated.

6. Switch of the appliance to confirm the

operation.

Do these steps to activate again the audible

signals:

1. Follow the procedure how to deactivate

the audible signals from point 1 to point

4.

2. The programme light A goes off. The end-

of-programme indicator light is off. (The

programme light B continues to flash).

– The audible signals are deactivated.

3. Press the programme button again. The

end-of-programme indicator light comes

on.

– The audible signals are active.

4. Switch of the appliance to confirm the

operation.

Use of the appliance

Refer to the instructions for each step of pro-

cedure:

1. Make a check if the adjustment of the

water softener agrees with the water

hardness in your area. If necessary, ad-

just the water softener.

2. Fill the salt container with dishwasher salt.

3. Fill the rinse aid dispenser with rinse aid.

4. Load cutlery and dishes into the appli-

ance.

5. Set the correct washing programme for

the type of load and soil.

6. Fill the detergent dispenser with the cor-

rect quantity of detergent.

7. Start the washing programme.

If you use detergent tablets, refer to 'Use

of detergent and rinse aid'.

Setting the water softener

The water softener removes minerals and

salts from the water supply. Minerals and

salts can have a bad effect on the operation

of the appliance.

Equivalent scales measure the water hard-

ness:

• German degrees (dH°).

• French degrees (°TH).

• mmol/l (millimol for each litre - international

unit for the hardness of water).

• Clarke degrees.

Adjust the water softener to the water hard-

ness in your area. If necessary, contact your

local water authority.

Water hardness Water hardness adjustment

°dH °TH mmol/l Clarke manually electronically

51 - 70 91 - 125 9,1 - 12,5 64 - 88

2

1)

10

43 - 50 76 - 90 7,6 - 9,0 53 - 63

2

1)

9

6 electrolux

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Comments to this Manuals

No comments