
ESL6350LO... ...EN DISHWASHER USER MANUAL
6.3 Filling the rinse aid dispenserABDCMAX1234+-ABDC1.Press the release button (D) to openthe lid (C).2.Fill the rinse aid dispenser (A), nomore than
7.1 Using the detergentABD3020CMAX1234+-B2003A DC1.Press the release button (B) to openthe lid (C).2.Put the detergent in the compartment(A) .3.If the
2.Press again and again until thedisplay shows the delay time you wantto set (from 1 to 24 hours).• The display shows intermittently theprogramme dur
instructions on the detergentpackaging.8.3 Loading the basketsRefer to the supplied leaflet withexamples of the load of the bas-kets.• Only use the ap
A1A22.To disassemble the filter (A), pullapart (A1) and (A2).3.Remove the filter (B).4.Wash the filters with water.5.Before you put the filter (B) bac
Problem Possible solution If the delay start is set, cancel the setting orwait for the end of the countdown.The appliance does not fill withwater.Mak
• The display shows the current set-ting.Rinse aid dispenser off.Rinse aid dispenser on.5.Press to change the setting.6. Press the on/off button to d
ENGLISH 17
18www.electrolux.com
ENGLISH 19
CONTENTS1. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32. PRODUCT DESCRI
www.electrolux.com/shop156966270-A-062013
1. SAFETY INSTRUCTIONSBefore the installation and use of the ap-pliance, carefully read the supplied in-structions. The manufacturer is not re-sponsi
1.3 Use• This appliance is intended to be used inhousehold and similar applications suchas:– Staff kitchen areas in shops, officesand other working en
2. PRODUCT DESCRIPTION124379 5611 8 101Upper spray arm2Lower spray arm3Filters4Rating plate5Salt container6Water hardness dial7Rinse aid dispenser8Det
Indicators DescriptionSalt indicator. It is always off while the programme operates.Rinse aid indicator. It is always off while the programme operates
Information for test institutesFor all the necessary information for test performance. send an email to:[email protected] down
6. BEFORE FIRST USE1.Make sure that the set level of the wa-ter softener agrees with the waterhardness in your area. If not, adjustthe water softener.
Electronic adjustment1. Press the on/off button to activate theappliance.2.Do the Reset function.3. Press and hold, at the same time, and until the
Comments to this Manuals