Electrolux ESL7845RA User Manual

ESL7845RAEN Dishwasher User Manual

Settings Values DescriptionVolume From level 1 to level10.Adjustment of the soundvolume.Brightness From level 0 to level9.Change the brightness ofthe

6.5 How to save theMyFavourite programmeYou can only save 1 programme at atime. A new setting cancels the previousone.1. Press the Option key.2. Selec

If an option is not applicableto a programme, the relatedindicator is off or it flashesquickly for a few secondsand then goes out.Activating options c

7.4 TimeManagerThis option increases the pressure andthe temperature of the water.The washing and drying phases areshorter. The total programme durati

German de‐grees (°dH)French de‐grees (°fH)mmol/l Clarke de‐greesWater softenerlevel23 - 28 40 - 50 4.0 - 5.0 28 - 35 619 - 22 33 - 39 3.3 - 3.9 23 - 2

8.3 The rinse aid dispenserThe rinse aid helps to dry the disheswithout streaks and stains.The rinse aid is automatically releasedduring the hot rinse

CAUTION!Make sure that items do notstick out of the basket frameas it can cause damage tothe items and the ComfortLift mechanism.The Comfort Lift mech

Starting a programmeWhen you activate the appliance, thedisplay shows the programme list. Theprogramme ECO is always the defaultprogramme.1. Scroll th

Off, the appliance is automaticallydeactivated.2. Close the water tap.10. HINTS AND TIPS10.1 GeneralFollow the hints below to ensure optimalcleaning a

• Make sure that the spray arms canmove freely before you start aprogramme.10.5 Before starting aprogrammeBefore you start the selectedprogramme, make

CONTENTS1. SAFETY INFORMATION...32. SAFETY INSTRUCTIONS...

2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A).4. Wash the filters.5. Make sure that there are no residuesof food or soil i

4. To install the spray arm back, pressthe spray arm upwards andsimultaneously turn itcounterclockwise until it locks intoplace.11.3 External cleaning

Problem and alarm code Possible cause and solutionThe program does notstart.• Make sure that the appliance door is closed.• The appliance has started

Problem and alarm code Possible cause and solutionThe appliance trips the cir‐cuit-beaker.• The amperage is insufficient to supply simultaneous‐ly all

Problem Possible cause and solutionThe dishes are wet. • For the best drying performance activate the optionXtraDry and set AirDry .• The programme do

Refer to "Before first use", "Daily use" or "Hints andtips" for other possiblecauses.13. TECHNICAL INFORMATIONDimensions

ENHazardous substancesParts Name Pb Hg Cd Cr6+ PBBs PBDEsCabinetXTubSump & hydraulics (including pumps, heater & sensors)XSoftener & inner

ENGLISH 27

www.electrolux.com/shop117872680-A-132018

1. SAFETY INFORMATIONBefore the installation and use of the appliance, carefullyread the supplied instructions. The manufacturer is notresponsible f

• The operating water pressure (minimum andmaximum) must be between 0.5 (0.05) / 8 (0.8) bar(MPa)• Obey the maximum number of 13 place settings.• If t

• Connect the mains plug to the mainssocket only at the end of theinstallation. Make sure that there isaccess to the mains plug after theinstallation.

3. PRODUCT DESCRIPTION549 6713 12111014 2318 1Top spray arm2Upper spray arm3Lower spray arm4Filters5Rating plate6Salt container7Air vent8Rinse aid dis

When AirDry is activatedduring the drying phase, theprojection on the floor maynot be completely visible. Tocheck the remaining time ofthe running pro

Programme Degree of soilType of loadProgramme pha‐sesOptionsAutoFlex45°-70° 2)• All• Crockery, cut‐lery, pots andpans• Prewash• Wash from 45 °Cto 70 °

Programme 1)Water(l)Energy(kWh)Duration(min)AutoFlex 45°-70° 8 - 15 0.7 - 1.7 46 - 170FlexiWash 50°-65° 14 - 16 1.2 - 1.5 160 - 180Intensive 70° 12.5