Electrolux GA60GLI202 User Manual download pdf (Page 27)

Indicator lights

Salt

It comes on when it is necessary to fill the salt container. Refer to 'Use of dishwasher

salt'.

After you fill the container, the salt indicator light can stay on for some hours. This

does not have an unwanted effect on the operation of the appliance.

1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while

a washing programme operates.

Programme selection button

With this button you can select the washing

programme. Press the button again and

again until the display shows the number of

the necessary programme.

Refer to 'Washing programmes' for more da-

ta about the washing programmes.

Half-load button

Use this function when it is necessary to start

a washing programme with baskets not fully

load.

The half-load function decreases the time

duration and the consumption of water and

energy.

Put the dishes in the upper and lower basket

and decrease the detergent dosage when

you use this function.

Set the half-load function only before the

start of a washing programme. It is not pos-

sible to set the function while a washing pro-

gramme operates.

The half-load function is not available for all

washing programmes. Refer to 'Washing

programmes'.

Press the half-load button. If the function is

available, the related indicator light comes

on .

Sanitize button

This function gives more hygiene to dishes

and glasses. During the last rinse, the tem-

perature increases to 68°C and stays above

65°C minimum for 10 to 14 minutes.

Set the sanitize function only before the start

of a washing programme. It is not possible to

set the function while a washing programme

operates

The sanitize function is not available for all

washing programmes. Refer to 'Washing

programmes'.

Press the sanitize button. If the function is

available, the related indicator light comes

on.

Extra-rinse button

This function adds one more cold rinse to the

washing programme. The programme dura-

tion and the water consumption increase.

Set the extra-rinse function before the start

of a washing programme. It is not possible to

set the function while a washing programme

operates.

The extra-rinse function is not available for all

washing programmes. Refer to 'Washing

programmes'.

Press the extra-rinse button. If the function is

available, the related indicator light comes

on.

Multitab button

Press this button to activate/deactivate the

multitab function. Refer to 'Multitab function'.

Delay start button

Use this button to delay the start of the wash-

ing programme with an interval between 1

and 19 hours. Refer to 'Select and start a

washing programme'.

Display

The display shows:

• The electronic adjustment of the level of

the water softener.

• Activation/deactivation of the rinse aid dis-

penser (only with multitab function on).

• The number of the washing programme.

• Remaining time to the end of the washing

programme.

• The end of a washing programme. The

display shows a zero.

• Remaining time to the end of the delay

start.

• Fault codes.

Function buttons

Use the function buttons for these opera-

tions:

• To adjust electronically the level of the wa-

ter softener. Refer to 'Setting the water

softener'.

electrolux 27

1 ... 26 27 28 ... 44

Comments to this Manuals

No comments

Electrolux GA60GLI202 User Manual Page 27

Comments to this Manuals

Related products and manuals for Dishwashers Electrolux GA60GLI202