Electrolux KDW1 User Manual download pdf (Page 31)

Installation and connection instructions

Adjusting the worktop

You can move the worktop forward or

backward by 25 mm in order to align the

machine with other kitchen units.

Simply unscrew the two rear retaining

screws, move the top to the required

position and then retighten the screws.

Fitting under a counter

(kitchen worktop or sink)

By removing the machine’s worktop, you

can install it under a close fitting unit or a

pre-existing top, providing the dimensions

of the recess correspond to those shown

in the picture.

Proceed as follows:

- Remove the machine’s worktop by

unscrewing the two rear retaining

screws, pull from the front and slide

out the rear slots, lifting the worktop.

Insert the machine after adjusting height and levelling with adjustable feet.

When inserting the machine, ensure that the water inlet and drain hoses are

not kinked or squashed.

IN26

820

570 - 600

600

IN05

152985 86/1 en 22-10-1999 13:04 Pagina 31

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 39 40

No comments

Electrolux KDW1 User Manual Page 31