Electrolux T4250 Specifications download pdf (Page 20)

Error codes

Error code E14

Whentheignitioncontrolfailstodetectaame,asignalissenttothePCB,anderrorcode

E14 is displayed.

When this condition occurs, the gas valve is shut off and the ignition control must be reset

manually.

Resetting

Open the operating panel and press the gas reset button A on the back of the

PCBforonesecond.

OPL: Press the reset button B next to the operating panel.

NOTE! When resetting the system the dryer must operate on a program with heat

and the heat indicator must be on.

Japanonly:Byopeningandclosingthedoor(coinoperateddryersonly).

Error code

ItisnormalthaterrorcodeE14occurswhenrststartingupthedryer,sinceairinthegas

line must be purged.

Check that air supply to the room and ventilation are compliant with the recommendations

given in the installation manual.

If the problem persists, refer to Error code 14 in the Selecta Control service manual for

more information.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

No comments

Electrolux T4250 Specifications Page 20