Electrolux W4105N Service Manual download pdf (Page 43)

Troubleshooting

Fault code 60, ACTUATOR CIRCUIT

The DLCU processor controls the door lock actuator coil. The DLCU pro-

cessor checks continuously that the coil is engaged. DLCU can detect a

break in the circuit (>50 kohm) (DLCU cannot detect a short in the circuit).

If there is a break in the actuator circuit, CPU will be notiﬁed; the fault

message will disappear if the fault ceases.

CPU reads the fault message when the program starts and ﬁnishes and

generates a fault code, the fault message is ignored between these two

occasions.

Reason:

•Thefaultcanbecausedbyabreakinthecablesbetweenthehatchlock

and the CPU, or caused by a fault in the hatch lock solenoid.

•FaultorbreakintheCPUcircuits.

Action:

•Ifthefaultreturnsafterareset,andisnotcausedbyafaultinthehatch

lock or the cables for the hatch lock, change the CPU.

1 ... 42 43 44 ... 122

No comments

Electrolux W4105N Service Manual Page 43