Electrolux 36 User Manual download pdf (Page 10)

1010

Place the template in the ceiling

considering the instructions for

ceiling support structures.

Mark with a pencil the hole

locations for screws and duct in

the ceiling (see also next page)

Fix the upper horizontal

support with 4 wood screws.

4 wood screws

Attach the vertical supports (inf)

(A) to the hood. Then attach

horizontal support (B) (inf)

(B)

(A)

16 assembly screws

8 assembly

screw

Attach a second vertical

support set to adjust the

vertical distance.

16 assembly screws

2 /side

Place glass brackets using 2

screws by side.

The lower duct cover shall

be secured to rangehood by

4 screws.

Place lower duct covers

using one plastic bracket at

each vertex. (4 needed)

All version:

Perform the electrical

connection.

Vent hood ONLY

Perform the ductwork

connection.

Installation with optional

recirculation kit.

Install the recirculation kit and

connect air deflector to transition

Attach the vertical duct cover

supports using 4 screws. Place

each spring using a screw by side.

click !

Attach the assembly to the

support fixed on the ceiling

Assure with screws (16)

Insert the plastic gaskets on

each side of the hood.

(rear and front)

Place the Glass Canopy onto

the hood. 2 people are

recommended to do this.

SEE NEXT PAGES

FOR FURTHER DETAIL

Place upper duct covers

sliding through until spring

sounds click. Then verify

Installing the hood

Instal the grease filter and turn power on at service

panel. Check operation of the hood.

IMPORTANT: If the hood doesn’t switch ON, before

calling for service, check if the internal General ON/

OFF Pushb-utton Switch is switched ON.

General ON/OFF

Push button Switch

Back side of the hood

Frontside of the hood

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 18 19

Comments to this Manuals

No comments

Electrolux 36 User Manual Page 10

Comments to this Manuals

Related products and manuals for Fans Electrolux 36