Electrolux EFC928X/KO User Manual download pdf (Page 7)

Mounting the cooker hood - Fig. 5

• Rest the template correctly against the wall. The lower

corner of the template corresponds to the lower corner of

the extractor hood. Fig. 3.

• A cross is marked on the template to indicate the centre.

Mark this point on the wall. Fig. 3.

• Drill two holes (Ø 8 mm) in the wall at the points

indicated, insert the stops (Ø 8 mm) and screw in the

hooks provided. Fig. 3.

• Hang the hood and adjust its position using the screws

on the hooks. Fig. 4.

• The reference point “a” marked on the body of the

extractor hood must coincide with the line you have

drawn on the wall. Fig. 4.

• Once the extractor hood has been correctly aligned,

remove the grease filter.

• From inside the hood, mark the final points at which the

hood has to be fixed to the wall. Fig. 5.

(to reach these points it will be necessary to remove

activated carbon filter frame until the filter itself is

replaced - see Fig. 2).

• Remove the hood.

• Drill 2 holes (Ø 8 mm) and insert the plugs (Ø 8 mm).

Fig. 5.

• Hang the extractor hood up again.

• Fix the hood into its final position using 2 screws (Ø

5x45 mm). Fig. 5.

Fig. 6

Fig. 7

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Electrolux EFC928X/KO User Manual Page 7