Electrolux ER 7947B User Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 24
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
Before any maintenance or cleaning work
is carried out DISCONNECT the appliance
from the ELECTRICITY supply.
Internal Cleaning
Clean the inside and accessories with warm water
and bicarbonate of soda (5ml to 0.5 litre of water).
Rinse and dry thoroughly.
Do not use detergents, abrasive powders,
highly perfumed cleaning products, wax
polishes or cleaning products containing
bleach or alcohol.
Clean the drain hole of the water trough at regular
intervals and ensure that the drain hole is clear at
all times. If blocked, carefully clear using a piece
of flexible curtain wire inserted into the drain
outlet to remove the blockage.
Regularly check the door seals and wipe clean to
ensure they are clean and free from debris.
External Cleaning
Wash the outer cabinet with warm soapy water.
Do NOT use abrasive products.
There are sharp edges on the underside
of the product so care should be taken
when cleaning.
Once or twice a year dust the condenser (black
grille) and the compressor at the back of the
appliance, with a brush or vacuum cleaner, as an
accumulation of dust will affect the performance
of the appliance and cause excessive electricity
consumption.
To Change the Light Bulb
1. Switch off the appliance and disconnect
from the electricity supply.
2. Remove the light cover by removing the
screw at the rear with a screwdriver.
3. Pull the rear cover outwards towards the
middle of the cabinet.
4. Unscrew the bulb and replace it with a
new 15 watt E14 SES bulb (available from
your local Service Force Centre).
5. Replace the cover by sliding it into its
original position.
6. Replace the screw.
10
MAINTENANCE AND CLEANING
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Comments to this Manuals

No comments