Electrolux ER8134I User Manual

INFO ISTRUZIONI PER L’INSTALLAZIONE E L’USOINSTALLATION AND INSTRUCTION MANUALINSTALLATIONS- UND GEBRAUCHSANWEISUNG FRIGORIFERO-CONGELATORE ER 8134

24USEUse of the freezerOperationInsert the plug into the wall socket. The pilot light will light up, indicating that the appliance is powered.Turn the

25Freezing fresh foodThe 4-star freezer ( ) is suitable for long term storage of commercially frozen food and for freezing fresh food.To fast freeze f

26Use of the refrigeratorOperationInsert the plug into the wall socket.Open the refrigerator door and turn the thermostat knob, clockwise, beyond the

27Movable shelvesThe walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired.Positioning the

28DefrostingFrost is automatically eliminated from the evaporator of the refrigerator compartment every time the motor compressor stops, during normal

29MAINTENANCEUnplug the appliance before carrying out any maintenance operation.WarningThis appliance contains hydrocarbons in its cooling unit; maint

16Printed on recycled paperWARNINGSGeneral Safetyª This appliance is designed to be operated by adults. Children should not be allowed to tamper with

17Installationª During normal operation, the condenser and compressor at the back of the appliance heat up considerably. For safety reasons, minimum v

18CONTENTSInstallation 19ª Positioning 19ª Cleaning the interior 19ª Door reversibility 20ª Building-in instructions 20ª Electrical connection 23Techn

19INSTALLATIONIf this appliance featuring magnetic door seals is to replace an older appliance having a spring lock (latch) on the door or lid, be sur

20Right openingRemove the pins (P) and (P1).Building-in instructionsHousing dimensionsHeight 1780 mmDepth 550 mmWidth 560 mmFor safety reasons, minimu

21Push appliance into housing until stop strip (A) touches the kitchen unit.Open the door and push the appliance against the side of kitchen furniture

22Apply covers (B) on joint cover lugs and into hinge holes.Position the runners (H) at the top and bottom of the inside of the kitchen unit as shown

23In case of side fixing of the appliance, it will be sufficient to loose the screws fixing the bracket (G) and to position it as shown in Fig. 11.The do