Electrolux ST29112 User Manual download pdf (Page 64)

E

F

1

2

3

4

5

Remove using a tool the cover (E)

unscrew the lower hinge pivot (F)

and place it on the opposite side.

Reinsert the cover (E) on the oppo-

site side.

Reinsert the lower door on the piv-

ot pin (F).

Remove the 2 plastic covers and

refit it on the opposite side.

Insert the pivot of the center hinge

on the left hole of the lower door.

Insert the lower door on the pivot

of the lower hinge (F).

Insert the upper door on the pivot

of the upper hinge. Rotate the

doors to insert the pivot of the

hinge in the left hole of the upper

door.

Open the doors and re-screw the

center hinge (H) on the opposite

side. Do not forget the plastic

spacer, inserted under the center

hinge (H).

Pay attention that the front board

of the doors are parallel to the front

board of the top.

Remove the covers (if foreseen),

unscrew the handle. On the oppo-

site side remove the hole covers.

Fix the handle on the opposite side

together with the covers. Insert the

plastic plugs into the holes left

open that can be found in the in-

struction for use bag.

WARNING!

Connect it to the power socket.

In case you do not want to carry out the

above mentioned operations, contact the

nearest After Sales Service Force. The Af-

ter Sales Service specialist will carry out

the reversibility of the doors at your cost.

WARNING!

After having reversed the opening

direction of the doors check that

all the screws are properly tight-

ened and that the magnetic seal

adheres to the cabinet.

If the ambient temperature is cold

(i.e. in Winter), the gasket may not

fit perfectly to the cabinet. In that

case, wait for the natural fitting of

the gasket. Lay down the appli-

ance back side down.

64

www.electrolux.com

1 2 ... 59 60 61 62 63 64 65 66 67 68

Comments to this Manuals

No comments