Electrolux EK110SLWE A User Manual download pdf (Page 34)

Climate rating

The climate rating indicates the room

temperature at which the appliance may

be operated in order to achieve full refrig-

eration performance.

The climate rating is indicated on the

type plate.

The position of the type plate is shown in the section entitled

Description of the appliance.

Climate rating Room temperature

SN +10°Cto+32°C

Do not operate the appliance outside the

specified room temperature range.

Setting up

• StandardEN378specifiesthattheroominwhichyouinstall

your appliance must have a volume of 1 m

per 8 g of R 600a

refrigerant used in the appliance, so as to avoid the formation of

inflammablegas/airmixturesintheroomwheretheappliance

is located in the event of a leak in the refrigerant circuit. The

quantity of refrigerant used in your appliance is indicated on

the type plate on the inside of the appliance.

•Onlyusetheappliancewhenitisinstalled.

•

Do not cover ventilation openings

or grille.

Switching the appliance on and o

Switching the appliance on

Pressthe button until the temperature display lights

up.

Switching the appliance o

Keep the buttonpressedforapprox.3secondssothatthe

temperature display goes out.

Operating and control elements

1 Temperature display (display)

2 Temperature setting button

3 On/Obutton

4 ActionCool button (the ActionCool button switches the refrig-

eratorcompartmenttomaximumcooling)

Symbols in the display

Setup mode is activated (activating the child lock)

Child lock is activated

ActionCoolONsymbol

23 4

Setting the temperature

Pressthe button,thenextlowertem-

perature value in the temperature display

will light up.

Keep pressing the

button until the de-

sired value is displayed.

Recommended temperature setting: 5°C. An average temperature

ofapprox.-18°Cisthenestablishedinthefreezercompartment.

After a certain period of operation, the interior temperature will

adjust to the value which has been set.

If F1 appears in the display, the appliance has suffered a fault. In

this case, contact the customer service department.

Electrical connection

Only operate the appliance with alternating current (AC).

The permissible voltage and frequency are indicated on the type

plate. The position of the type plate is shown in the section entitled

Description of the appliance.

The socket must be properly earthed and protected by a fuse.

The tripping current of the fuse must be between 10 A and 16 A.

The socket must not be situated behind the appli-

ance and must be easily accessible.

Donotconnecttheapplianceusinganexten-

sioncableorextensionsocket.

Do not use stand-alone inverters (conversion

of direct current to alternating current/three-

phase current) or energy-saving plugs. Risk

of damage to the electronic control system!

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 43 44

Comments to this Manuals

No comments

Electrolux EK110SLWE A User Manual Page 34

Comments to this Manuals

Related products and manuals for Fridges Electrolux EK110SLWE A