Electrolux ER 6642 T User Manual download pdf (Page 14)

To reverse the top hinge assembly proceed as follows:

Remove the 2 worktop retaining screws from the

back of the appliance.

Slide the worktop towards the rear and lift clear of

the appliance.

Remove the 2 upper hinge plate retaining screws.

Remove the hinge plate from the top of the door.

Unscrew the hinge pin from the hinge plate and re-

insert on the opposite side of the pate.

Rotate the hinge assembly 180° and insert the

hinge assembly into the opposite location.

Refit the 2 hinge plate retaining screws.

Relocate the worktop and refit the worktop

retaining screws.

To reverse the handle proceed as follows:

Remove screw covers (if fitted) and handle retaining

screws. Remove blanking plugs on the opposite

side

using a punch

Relocate the handle to the opposite side and refit

retaining screws (covers if fitted), and

push the

plastic plugs supplied with the instruction book into

the holes where the handle was previously fitted

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

No comments

Electrolux ER 6642 T User Manual Page 14