Electrolux ERES35800X User Manual download pdf (Page 21)

21

Installing the cabinet

When two appliances are placed

beside each other, the spacers

enclosed in the plastic wrapping

should be glued between the

appliances. As shown in the

illustration.

Make sure that the power plug is not

squashed or damaged by the back of

the product.

· A damaged power plug may

overheat an d cau se a fire.

Do not place heavy articles or the

product itself on the power cord.

· there is a risk of a short circuit an d

fire.

If the power plug socket is loose, do not

insert the power plug.

· there is a risk of electric shock or fire.

To obtain the best performance from the

cabinet, ensure:

· the cabinet is placed in a dry, cool

place and is not exposed to direct

sunlight.

· the cabinet is not placed close to a

source of heat, e.g. a cooker or

dishwasher.

· the cabinet is level. The cabinet

should not lean against any wall. If

necessary adjust the feet using the

adjustment spanner supplied.

· there is good air circulation around

the cabinet and that the air chan n els

below and behind the cabinet are not

blocked. The ventilation space above

the cabinet must be at least 4 cm.

The ventilation space can either be

a) directly above the cabinet, or

b) behind and above the top cupboard.

In this case, the space behind the

cupboard must be at least 50 mm deep.

50mm

a)

b)

Cabinet is placed at a location where

the ambient temperature corresponds

to the climate classification*, for which

the appliance is designed.

* See on the rating plate on the inside

of the appliance.

The following table shows which

ambient temperature is correct for

each climate classification.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments