Electrolux IK1555CR User Manual download pdf (Page 48)

Problem Possible cause Solution

The door is not closed

correctly.

Refer to "Closing the door".

The door has been

opened too frequently.

Do not keep the door open

longer than necessary.

The product temperature

is too high.

Let the product tempera-

ture decrease to room tem-

perature before storage.

The room temperature is

too high.

Decrease the room temper-

ature.

Water flows on the

rear plate of the re-

frigerator.

During the automatic de-

frosting process, frost de-

frosts on the rear plate.

This is correct.

Water flows into the

refrigerator.

The water outlet is clog-

ged.

Clean the water outlet.

Products prevent that wa-

ter flows into the water

collector.

Make sure that products do

not touch the rear plate.

Water flows on the

ground.

The melting water outlet

does not flow in the evap-

orative tray above the

compressor.

Attach the melting water

outlet to the evaporative

tray.

The temperature in

the appliance is too

low.

The temperature regulator

is not set correctly.

Set a higher temperature.

The temperature in

the appliance is too

high.

The temperature regulator

is not set correctly.

Set a lower temperature.

7.1 Replacing the lamp

1.

Disconnect the appliance.

2.

Push the movable part to unhook the

lamp cover (1).

3.

Remove the lamp cover (2).

4.

Replace the lamp with one of the

same power and specifically designed

for domestic appliances only.

5.

Install the lamp cover.

6.

Connect the appliance.

7.

Open the door. Make sure that the

lamp comes on.

1

2

7.2 Closing the door

1.

Clean the door gaskets.

2.

If necessary, adjust the door. Refer to

"Installation".

3.

If necessary, replace the defective

door gaskets. Contact the Service

Center.

48

www.electrolux.com

1 2 ... 43 44 45 46 47 48 49 50 51 52

Comments to this Manuals

No comments