78
Important
When removing, ensure that the mounting strips do
not move.
7.
Open the door.
Unscrew the retaining bracket with
the mounting strips.
To do so, use the ring
spanner provided.
7.
8.
10.
9.
10.
A = 1190 mm
8.
Position the retaining bracket in the middle of the door panel and
secure to the door panel using six 4 x 15 screws.
9.
Slide the cover onto the retain-
ing bracket from the side.
10.
Attach the retaining plates to the door panel using three 4 x 15
screws per plate.
Important
Fit the unit handle to the panel at this stage.
11.
11.
Remove the mounting strips and insert in the
adjacent openings.
12.
12.
Pull soft stop mechanism downwards.
The soft stop mechanism will then
contract.
13.
Pivot soft stop mechanism to the left.
13.
Comments to this Manuals