Electrolux IK276010 User Manual download pdf (Page 24)

Fitting dimensions

Align housing unit with spirit level and set square using shims if

necessary. The shelves and sides of the housing unit must be

perpendicular to each other.

At least 200 cm² is required for ventilation at the bottom and

around the housing unit.

Fitting dimensions (mm):

A B C

EURO IK 2760 560-570 550 559

SMS IK 319 550 605 545

Changing the compartment door.

• Remove plugs ➊.

• Unscrew lash ➋. Unscrew compartment door with bearings ➌,

turn through 180° and reassemble on the other side.

• Cover holes with plugs ➊.

Changing over door hinges

• Loosen attachment screws ➊.

• Remove the door.

• Lift off covers ➌.

• Replace all attachment screws ➊ on the other side and screw

in a little way.

• Undo door attachment screws ➋ and transfer the hinges to the

diagonally opposite corner.

• Suspend the appliance doors on the screws inserted previously

➊ and tighten the screws.

• Cover all open attachment holes with covers ➌.

EURO

Installing in a kitchen unit ERO3298

• Pull off ﬁlm and stick sealing

strip

to handle side of

applince, shortening to the

height of the recess if neces-

sary.

• Note the thickness of the unit

walls:

For 16 mm unit wall (568 mm

recess):

- Clip spacers bq and br onto

the hinges.

- Slide appliance into the re-

cess until the spacers make

contact with the side of the

units.

SMS

Installing in a kitchen unit IK 319

• Slide the attachment element

into the rail underneath the

appliance on the handle side

on the left or right, depending

on which side the handle is.

Screw into place with the 3.5 x

11 countersunk screw.

• Screw plastic bracket onto the han-

dle side of the appliance with M5

screws.

1 2 ... 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments

Electrolux IK276010 User Manual Page 24

Comments to this Manuals

Related products and manuals for Fridges Electrolux IK276010