Electrolux ST29112 User Manual download pdf (Page 61)

6.1 Replacing the lamp

1.

Disconnect the mains plug from the

mains socket.

2.

Remove the screw from the lamp

cover.

3.

Remove the lamp cover (refer to the

illustration).

4.

Replace the used lamp with a new

lamp of the same power and specifi-

cally designed for household applian-

ces. (the maximum power is shown

on the lamp cover).

5.

Install the lamp cover.

6.

Tighten the screw to the lamp cover.

7.

Connect the mains plug to the mains

socket.

8.

Open the door. Make sure that the

lamp comes on.

6.2 Closing the door

1.

Clean the door gaskets.

2.

If necessary, adjust the door. Refer to

"Installation".

3.

If necessary, replace the defective

door gaskets. Contact the Service

Center.

7. INSTALLATION

WARNING!

Read the "Safety Information"

carefully for your safety and cor-

rect operation of the appliance

before installing the appliance.

ENGLISH 61

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 67 68

Comments to this Manuals

No comments