700XP
Electric Pasta Cookers
The 700XP range is comprised of over 100 models designed to guarantee the highest level of performance,
reliability, energy saving, safety standards and ergonomic operation. These concepts are reflected throughout
the line in its modularity, construction and numerous configurations: countertop (on base or table),
free-standing, on concrete or stainless steel socle, bridged or cantilever. Thanks to its advance technology and
premium performance, 700XP is a perfect solution for institutions of small sizes with limited footprint as well as
restaurants needing to obtain the most from the kitchen space. The models detailed in this sheet are
freestanding electric pasta cookers.
371098
EASY TO INSTALL
• Main connections are accessible
from below the base of the unit.
• Access to all components from the
front.
• ESD available as accessory to be
installed separately: the energy saving
device uses the heat still present in
the water drained through the
overflow to pre-heat the tap-in water
up to 60°C, thus ensuring constant
water boiling.
EASY TO CLEAN
• Well in AISI 316-L stainless steel is
seamlessly welded into the top of the
appliance guarantees high resistance
against the corrosive action caused
by salty hot water.
• One piece pressed worktop in
1,5mm stainless steel with smooth,
rounded corners.
• Exterior panels in stainless steel
with Scotch Brite finish.
• All models have right-angled, laser
cut side edges to allow flush-fitting
joins between units eliminating gaps
and possible dirt traps.
EASY TO USE
• The freestanding electric pasta
cooker is the ideal appliance for
restaurantsand large institutions
needing high power and productivity.
The pasta cooker may also be used
to steam small quantities of food with
the use of optional accessories:
perforated GN containers and lids.
• Unique EnergyControl feature: a
5-level power control which regulates
the boiling level and optimizes energy
consumption.
• Optional Accessory: Automatic
lifting system with manual control
200mm wide, allowing to transform a
regular gas or electric pasta cooker
into one with automatic basket lifting.
The electronic programmability and
automatic lifting of the baskets make
this unit a must for any kitchen
wanting to standardize their cooking
procedures. Possibility to memorize
nine cooking times through digital
control. Automatic basket lifting
through push button function. Two
stainless steel basket supports, each
capable of holding one 170x220mm
basket. The unit may either be placed
individually on either side of the pasta
cooker, or two units may be installed
(one on each side of the pasta
cooker) to provide lifting for four
smaller portion baskets (optional
baskets to be ordered separately).
• Safety thermostat and
electromechanical sensor to prevent
the machine from running without
water.
Comments to this Manuals