Electrolux EHL7640FOK User Manual download pdf (Page 30)

lowest temperatures and do not brown

food too much.

6. CARE AND CLEANING

Clean the appliance after each use.

Always use cookware with clean bottom.

Scratches or dark stains on the

glass-ceramic cause no effect on

how the appliance operates.

To remove the dirt:

1.

– Remove immediately: melted

plastic, plastic foil, and food with

sugar. If not, the dirt can cause

damage to the appliance. Use a

special scraper for the glass . Put

the scraper on the glass surface at

an acute angle and move the blade

on the surface .

–

Remove after the appliance is

sufficiently cool: limescale rings ,

water rings, fat stains, shiny metal-

lic discolorations. Use a special

cleaning agent for glass ceramic or

stainless steel.

2.

Clean the appliance with a moist cloth

and some detergent.

3.

At the end rub the appliance dry

with a clean cloth.

7. TROUBLESHOOTING

Problem Possible Remedy

You cannot activate the

appliance or operate it.

Activate the appliance

again and set the heat

setting in less than 10

seconds.

You touched 2 or more

sensor fields at the same

time.

Touch only one sensor

field.

The STOP+GO function

operates.

Refer to the chapter “Dai-

ly Use”.

There is water or fat

stains on the control pan-

el.

Clean the control panel.

An acoustic signal

sounds and the appliance

deactivates.

An acoustic signal

sounds when the appli-

ance is deactivated.

You put something on

one or more sensor fields.

Remove the object from

the sensor fields.

The appliance deacti-

vates.

You put something on the

sensor field

.

Remove the object from

the sensor field.

The residual heat indica-

tor does not come on.

The cooking zone is not

hot because it operated

only for a short time.

If the cooking zone oper-

ated sufficiently long to

be hot, speak to the serv-

ice centre.

30

www.electrolux.com

1 ... 29 30 31 ... 72

Comments to this Manuals

No comments