Electrolux EHL7640FOK User Manual download pdf (Page 14)

TROUBLESHOOTING

Problem Possible Remedy

You cannot activate the

appliance or operate it.

Activate the appliance

again and set the heat set-

ting in less than 10 sec-

onds.

You touched 2 or more

sensor fields at the same

time.

Touch only one sensor

field.

The Stop+Go function op-

erates.

Refer to the chapter “Op-

erating instructions”.

There is water or fat stains

on the control panel.

Clean the control panel.

An acoustic signal sounds

and the appliance deacti-

vates.

An acoustic signal sounds

when the appliance is de-

activated.

You put something on one

or more sensor fields.

Remove the object from

the sensor fields.

The appliance deactivates. You put something on the

sensor field

.

Remove the object from

the sensor field.

The residual heat indicator

does not come on.

The cooking zone is not

hot because it operated

only for a short time.

If the cooking zone oper-

ated sufficiently long to be

hot, speak to the service

centre.

The Automatic Heat Up

function does not operate.

The cooking zone is hot. Let the cooking zone be-

come sufficiently cool.

The highest heat setting is

set.

The highest heat setting

has the same power as

the Automatic Heat Up

function.

The heat setting changes

between two levels.

The Power management

is activated.

Refer to “Power manage-

ment”.

The sensor fields become

hot.

The cookware is too large

or you put it too near to

the controls.

Put large cookware on the

rear cooking zones if nec-

essary.

There is no signal when

you touch the panel sen-

sor fields.

The signals are deactiva-

ted.

Activate the signals (refer

to “OffSound control”).

comes on

The Automatic Switch Off

operates.

Deactivate the appliance

and activate it again.

comes on

The Child Safety Device or

the Lock function oper-

ates.

Refer to the chapter “Op-

erating instructions”.

14

www.electrolux.com

1 ... 13 14 15 ... 40

Comments to this Manuals

No comments