Electrolux EQLP4520IK User Manual

HobEQLP4520IKElectroluxCooking

To see how long the cooking zoneoperates: set the cooking zone with .The indicator of the cooking zone starts toflash quickly. The display shows how

To confirm your selection wait until thehob deactivates automatically.When the function is set to you canhear the sounds only when:• you touch • Min

5.3 Öko Timer (Eco Timer)To save energy, the heater of the cookingzone deactivates before the count downtimer sounds. The difference in theoperation t

• Always use cookware with cleanbottom.• Scratches or dark stains on the surfacehave no effect on how the hoboperates.• Use a special cleaner applicab

Problem Possible cause RemedyThe hob deactivates. You put something on thesensor field .Remove the object from thesensor field.Residual heat indicato

Problem Possible cause Remedy comes on.The electrical connection isincorrect. The supply volt-age is out of range.Speak to a qualified electri-cian to

8.4 Attaching the seal1. Clean the worktop around the cut outarea.2. Attach the supplied seal stripe to thelower edge of the hob along the outeredge o

R 5mmmin.55mm340+1mm490+1mm50 mm50 mmmin.25 mmmin. 2 mm 8.6 Installation of more than onehobSupplied accessories: connection bar,heat-resistant silico

Width sum of all widths of hobsthat you install minus 20 mmExample:580 mm520 mm490 mm360 mm+ - =20 mm 920 mmAssembly1. Calculate correct cutout dimens

ELECTROLUX 9.2 Cooking zones specificationCooking zone Nominal pow-er (maximumheat setting)[W]Power func-tion [W]Power func-tion maximumduration [min]

CONTENTS1. SAFETY INFORMATION... 22. SAFETY INSTRUCTIONS...

• Put the smaller cookware on thesmaller cooking zones.• Put the cookware directly in the centreof the cooking zone.• Use the residual heat to keep th

ENGLISH21

www.electrolux.com22

ENGLISH23

867320587-B-142015User Manual: English

injuries and damages. Always keep the instructions withthe appliance for future reference.1.1 Children and vulnerable people safety• This appliance ca

• After use, switch off the hob element by its control anddo not rely on the pan detector.• If the glass ceramic surface / glass surface is cracked,sw

such a way that it cannot be removedwithout tools.• Connect the mains plug to the mainssocket only at the end of theinstallation. Make sure that there

• Do not use water spray and steam toclean the appliance.• Clean the appliance with a moist softcloth. Only use neutral detergents. Donot use abrasive

Sen-sorfieldFunction Comment3STOP+GO To activate and deactivate the function.4Bridge To activate and deactivate the function.5- Heat setting display T

Display DescriptionAutomatic Switch Off function operates.3.4 OptiHeat Control (3 stepResidual heat indicator)WARNING! / / There is a risk ofburns

4.5 Bridge functionThis function connects two left sidecooking zones and they operate as one.First set the heat setting for one of the leftside cookin