Electrolux EDB 872 User Manual download pdf (Page 7)

RATING PLATE

This is situated on the lower front frame of the

appliance and can be seen upon opening the

grill cavity door. Alternatively the rating plate

may also be found on the back or top of some

models (where applicable).

The appliance must be protected by a suitably

rated fuse or circuit breaker. The rating of the

appliance is given on the rating plate.

Do not remove the rating plate from the

appliance as this may invalidate the

guarantee.

CONNECTING TO THE

ELECTRICITY SUPPLY

The plug supplied with the oven can be fitted

directly to a suitable three pin earthed socket.

If you have to change the fuse replace it with a

3 amp fuse which has been ASTA approved to

BS 1362.

Do not use the plug until you have put the fuse

cover back on. If you cut the plug off dispose of

it safely as it will be a shock hazard if it is

inserted into a 13 amp socket elsewhere in the

house.

If the ignition system doesn't work there may be

a fault with the electrical supply. First, check the

socket by trying out another piece of electrical

equipment in it, if that works correctly renew the

fuse in the plug.

If the fuse keeps failing there is a fault in the

oven which must be put right. Do not use a

fuse with a rating higher than 3 amps. Do not

carry out other electrical work. Unplug the oven

and tell your installer.

WHEN FIRST SWITCHING ON

The timer must be set to manual operation

before the oven can be operated. This must be

done whenever the appliance is switched off at

the wall or when there has been a power

failure. For instructions on how to set the timer

see page 10.

The Grill is not controlled by the electronic

timer.

7

BEFORE USING THE APPLIANCE

This appliance must be earthed

and protected by a 3 amp fuse.

1 2 3 4 5 6 7 8 9 10 11 12 ... 43 44

Comments to this Manuals

No comments