Electrolux Lawn Mower Instruction Manual download pdf (Page 3)

ASSEMBLY IJ=HJI=J F=CA!%

ASSEMBLY IJ=HJI=J F=CA!$

DESCRIPTION IJ=HJI=JF=CA!#

ASSEMBLY OF GRASS CATCHER IJ=HJI=JF=CA!#

OPERATION IJ=HJI=JF=CA!&

ENGINE ADJUSTMENTS

Refer to the engine manufacturer's maintenance manual.

CAUTION:- 0.6l Oil must be added to the engine before use.

ASSEMBLY REAR DEFLECTOR IJ=HJI=JF=CA!#

ADJUSTMENT OF CUTTING HEIGHT IJ=HJI=JF=CA!&

l Always operate with the deflector or grasscatcher in the correct position.

l Always stop the engine before removing the grasscatcher or adjusting the height of cut.

l Never place your hands or feet underneath the deck or into the rear grass discharge chute while the engine is running.

Before mowing, remove all foreign objects from the lawn which may be thrown by the machine. While mowing, stay alert for any foreign objects which may have been

missed.

Never lift the rear of the mower while starting the engine or during normal operation.

Never place your hands or feet underneath the deck or into the rear discharge chute while the engine is running.

SAFETY PRECAUTIONS IJ=HJI=JF=CA!&

Keep the engine stop lever (14) depressed during machine operation. When the lever is

released, the engine stops.

MOWING

To cut the grass, push the lawn mower manually or insert the automatic advance gear.

ENGLAND

STARTING THE ENGINE

Once the machine has been set up properly, start the engine as follows:

Engines with choke system:

when the engine is cold, position the accelerator lever (13) on START

b)Operate the engine stop lever (14) to prepare the engine for start, keep lever

pressed against handle while starting and using the machine - it operates the

engine brake.

Engines with primer system:

Press the fuel-enrichment pump (Picture 'K' item 27) located on the carburettor

3 or 4 times position the accelerator lever (13) on MAX.

How to insert automatic advance: Lift up the clutch handle (16) and keep it pressed in

position.

CAUTION:

Engage the gear only when the engine is running.

How to disengage advance: Release the clutch handle.

Self-Propelled

Assemble the handle and fit the levers with pins and clips provided, assemble wheels as

shown and throttle if required.

IJ=HJI=J F=CA!&

IJ=HJI=J F=CA!'

IJ=HJI=J F=CA!&

IJ=HJI=J F=CA!'

For further information and explanations, read carefully the user instruction manual of

the engine.

d) Start engine.

MANUAL STARTING:

(While holding the engine stop lever (14)).

lHold the engine start-grip (11) and pull the starter rope gently until you feel the resistance

caused by compression. Return the starter rope slowly then pull the handle firmly towards

you to its full extent.

Keep the engine stop lever (14) depressed during machine

operation. When the lever is released, the engine stops.

MOWING

To cut the grass, push the lawn mower manually

IJ=HJI=J F=CA!'

Important: If, when you press the clutch lever, the automatic advance gear does not engage, the clutch cable should be adjusted by inserting the spring (P) in one of the

subsequent holes (R).

IJ=HJI=JF=CA!'

Manual lawn mower

Assemble the handle and fit the brake lever with the pin and clip provided, assemble

wheels as shown and throttle if supplied.

1 Upper handles 7 Deck 13 Throttle lever

2 Lower handles 8 Adjusting cutting height 14 Engine stop lever

3 Fastening knobs for upper handles 9 Spark plug 15 Reduction gear

4 Grass catcher 10 Fuel cap 16 Clutch lever

5 Oil filler cap 11 Engine start-grip

6 Oil drain plug 12 Rear deflector

'If applicable'