Electrolux EB SL70 User Manual download pdf (Page 31)

electrolux 31

1 When installing next to wood furnaces,

for safety reasons, a heat-resistant and

heat-insulating insulation plate is to be

installed on site to the same height as

the appliance and a minimum of 30 cm

deep.

3 To secure at the top, 2 holes with

ø 2.8 mm as stamped can be drilled

(Detail C).

Electrical connection/cable

The electrical connection must be carried

out by a licensed installer.

A type H05VV-F cable or a higher value must

be used as the power supply lead.

If there is no neutral wire on the domestic

supply side, please order transformer R07

with order number 940 304189 (2-phase).

The installation must be carried out using a

cable with a plug or, for a domestic installa-

tion, a separator with a contact opening of at

least 3mm is required which also separates

all poles of the appliance from the mains in

accordance with NIN 2000.

For a direct connection a cable length of at

least 120 cm is required.

1. Connect terminal as shown in the con-

nection diagram.

Connection diagram 400V

Phase definitions:

L1, L2, L3 (or R, S, T)

2. Secure the cord grip.

1 In case of repair the appliance must

be switched off from the mains.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments