Electrolux EBKGL7CN User Manual download pdf (Page 20)

To deactivate the function, press . The

display shows a message. Press again

and then to confirm.

When you deactivate the

appliance, the function also

deactivates.

10.4 Set + Go

The function lets you set a heating

function (or a programme) and use it later

with one press of any symbol.

1. Activate the appliance.

2. Set a heating function.

3. Press

again and again until the

display shows: Duration.

4. Set the time.

5. Press again and again until the

display shows: Set + Go.

6. Press to confirm.

Press any symbol (except for

) to start

the function: Set + Go. The set heating

function starts.

When the heating function ends, an

acoustic signal sounds.

• Function Lock is on when

the heating function

operates.

• The menu: Basic Settings

lets you activate and

deactivate the function:

Set + Go.

10.5 Automatic Switch-off

For safety reasons the appliance turns off

automatically after some time if a heating

function operates and you do not change

any settings.

Temperature (°C) Switch-off time

(h)

30 - 115 12.5

120 - 195 8.5

200 - 230 5.5

The Automatic switch-off

does not work with the

functions: Light, Food

Sensor, Duration, End Time.

10.6 Brightness of the display

There are two modes of display

brightness:

• Night brightness - when the appliance

is deactivated, the brightness of the

display is lower between 10 PM and 6

AM.

• Day brightness:

– when the appliance is activated.

– if you touch a symbol during the

night brightness (apart from ON /

OFF), the display goes back to the

day brightness mode for the next

10 seconds.

– if the appliance is deactivated and

you set the function: Minute

Minder. When the function ends,

the display goes back to the night

brightness.

10.7 Cooling fan

When the appliance operates, the cooling

fan activates automatically to keep the

surfaces of the appliance cool. If you

deactivate the appliance, the cooling fan

can continue to operate until the appliance

cools down.

11. CARE AND CLEANING

WARNING!

Refer to Safety chapters.

11.1 Notes on cleaning

• Clean the front of the appliance with a

soft cloth with warm water and a

cleaning agent.

• To clean metal surfaces, use a

dedicated cleaning agent.

www.electrolux.com20

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Comments to this Manuals

No comments