Electrolux EOB5751BAX User Manual download pdf (Page 4)

• Do not use a steam cleaner to clean the appliance.

• Do not use harsh abrasive cleaners or sharp metal

scrapers to clean the glass door since they can

scratch the surface, which may result in shattering of

the glass.

• If the supply cord is damaged, it must be replaced by

the manufacturer, its Authorised Service Centre or

similarly qualified persons in order to avoid a hazard.

• To remove the shelf supports first pull the front of the

shelf support and then the rear end away from the

side walls. Install the shelf supports in the opposite

sequence.

• Only use the core temperature sensor recommended

for this appliance.

2. SAFETY INSTRUCTIONS

2.1 Installation

WARNING!

Only a qualified person must

install this appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Obey the installation instruction

supplied with the appliance.

• Always be careful when you move the

appliance because it is heavy. Always

wear safety gloves.

• Do not pull the appliance by the

handle.

• Keep the minimum distance from the

other appliances and units.

• Make sure that the appliance is

installed below and adjacent safe

structures.

• The sides of the appliance must stay

adjacent to appliances or to units with

the same height.

2.2 Electrical connection

WARNING!

Risk of fire and electrical

shock.

• All electrical connections should be

made by a qualified electrician.

• The appliance must be earthed.

• Make sure that the electrical

information on the rating plate agrees

with the power supply. If not, contact

an electrician.

• Always use a correctly installed

shockproof socket.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to

the mains plug and to the mains

cable. Should the mains cable need to

be replaced, this must be carried out

by our Authorised Service Centre.

• Do not let mains cables touch or

come near the appliance door,

especially when the door is hot.

• The shock protection of live and

insulated parts must be fastened in

such a way that it cannot be removed

without tools.

• Connect the mains plug to the mains

socket only at the end of the

installation. Make sure that there is

access to the mains plug after the

installation.

• If the mains socket is loose, do not

connect the mains plug.

www.electrolux.com4

1 2 3 4 5 ... 40

Comments to this Manuals

No comments

Electrolux EOB5751BAX User Manual Page 4

Comments to this Manuals

Related products and manuals for Ovens Electrolux EOB5751BAX