Electrolux EOC55100X User Manual download pdf (Page 47)

cleaning and care electrolux 47

Pyrolytic cleaning

Warning: The oven gets very hot

during this process. Keep small

children away.

Important: Before carrying out the

pyrolytic cleaning process, all re-

movable parts, including the side

rails, must be removed from the ov-

en.

If you use the oven shelf runners

that are available as special acces-

sories, these must be removed be-

fore pyrolytic cleaning.

If the side rails or oven shelf runners

are still in place, ‘C1’ appears in the

time display.

The pyroluxe process then cannot

be started due to a safety cut-out

that protects the side rails/oven

shelf runners.

Performing Pyroluxe

1. First remove the worst of the residue

manually.

2. Set the oven function dial to

Pyroluxe .

– “Pyr 1” appears in the display.

3. Press the Pyrolyse Dauer but-

ton.

Pyrolytic cleaning then starts.

The Light does not work.

When a pre-set temperature is

reached, the door is locked.

The bars of the heat indicator light

up, until the door is unlocked again.

Changing the length of Pyroluxe

1. Proceed as described in the section

Performing Pyroluxe

2. As long as Cook time is flashing,

select the Pyroluxe period using the

buttonPyrolyse Dauer :

Button

Pyrolyse Dauer pressed

once

= “Pyr 1” or

Button Pyrolyse Dauer pressed

twice = “Pyr 2”.

Pyrolytic cleaning then starts.

If Cook time is no longer flash-

ing, press the Selection button

again and then perform the setting

procedure.

Changing the Pyroluxe switch-off

time

The Pyroluxe switch-off time can be

changed using the clock function End

time (within 2 minutes of setting the

Pyroluxe).

When the different Pyroluxes are

set:

– “Pyr 1” - 3:15 = long Pyrolyse: for a

high degree of soiling,

– “Pyr 2” - 2:15 = short Pyrolyse: for

a light degree of soiling.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 67 68

Comments to this Manuals

No comments