Electrolux EOB53001W User Manual download pdf (Page 25)

electrolux 25

Instructions for the Installer

Installation and connection

must be done in compliance with

the regulations in force. Any

interventions must be carried out

when the appliance is switched

off. Only accredited engineers

may work on the appliance.

The manufacturer disclaims any

liability if the safety measures

are not observed.

The oven is designed to be connected to 230 V

(50 Hz) electricity supply.

The oven has an easily accessible terminal

block which is marked as follows:

Letter L - Live terminal

Letter N - Neutral terminal

or E - Earth terminal

THIS OVEN MUST BE

EARTHED.

The cable used to connect the oven to the

electrical supply must comply to the

specifications given below.

It is necessary that you install a double pole

switch between the oven and the electricity

supply (mains), with a minimum gap of 3mm

between the switch contacts and of a type

suitable for the required load in compliance

with the current rules.

The switch must not break the yellow and

green earth cable at any point.

the yellow and green earth cable should be 2-

3 cm longer than the other cables.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments