Electrolux M) User Manual download pdf (Page 9)

7. SETTINGS

A

D

B

C

E

A)

Time touchpad

B)

Delay touchpad

C)

Buzzer touchpad

D)

Delicate touchpad

E)

Start/Pause touchpad

7.1 Child lock function

This option prevents children to play with

the appliance while a programme oper-

ates. The programme knob and the

touchpads are locked. Only

OFF

switch is unlocked.

Activating the child lock option

1.

Use the programme knob to set any

programme.

2.

Press and hold touchpads (A) and (D)

at the same time until the child lock in-

dicator comes on.

• It is possible to deactivate the child

lock option while a programme op-

erates. Press and hold the same

touchpads until the child lock indi-

cator goes off.

7.2 Water hardness and

conductivity

Water hardness is different for different lo-

cations. Water hardness has an effect on

the water conductivity and on the con-

ductivity sensor of the appliance. If you

know, the value of the water conductivity

you can adjust the sensor in order to have

better drying results.

Adjusting the conductivity sensor

1.

Use the programme knob to set any

programme.

2. Press and hold touchpads (A) and (B)

at the same time until one of the these

indicators comes on:

•

(low <300 μS/cm)

•

(moderate 300-600 μS/cm)

•

(high >600 μS/cm)

3. Press the touchpad (E) again and

again until the indicator of the correct

level comes on.

4.

To confirm the adjustment, press and

hold touchpads (A) and (B) at the

same time for approximately 2 sec-

onds.

8. DAILY USE

Before you use the appliance for the

first time

1. Clean the appliance drum with a moist

cloth.

2.

Start a short programme (e.g. 30 mi-

nutes) with moist laundry.

8.1 Starting a programme

without delay start

1. Prepare the laundry and load the ap-

pliance.

2. Set the correct programme and op-

tions for the type of load.

• The display shows the programme

duration.

3. Press the Start/Pause touchpad, the

programme starts.

CAUTION!

Make sure that when you close

the door, the laundry does not

catch between the appliance door

and the rubber seal.

8.2 Starting the programme with

delay start

1.

Set the correct programme and op-

tions for the type of load.

ENGLISH 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Comments to this Manuals

No comments