Electrolux TE1120 User Manual download pdf (Page 14)

9.4 Auto Off function

To decrease the energy consumption, the

Auto Off function turns off automatically

the appliance:

• if the Start/Pause button was not

pressed in the time of 5 minutes.

• after 5 minutes from the programme

end.

Push the

ON/OFF button to turn on the

appliance.

If the appliance is on, some indications

come in to the view on the display.

9.5 Setting a programme

Use the programme dial to set the

programme.

The time to the programme end comes

into the view on the display.

9.6 Options

Together with the programme you can set

1 or more special options.

To activate or deactivate the option push

the applicable button .

When the option is activated the LED

above the button or symbol on the display

comes into the view.

9.7 Starting a programme

To start the programme:

Push the Start/Pause button.

The appliance starts and the LED above

the button does not flash but is stable.

9.8 Programme change

To change a programme:

1. Push the ON/OFF button to turn off

the appliance.

2. Push again the ON/OFF button to turn

on the appliance.

3. Set a new programme.

9.9 Programme end

Clean the filter and drain the

water container after each

drying cycle. (See chapter

CARE AND CLEANING.)

If the drying cycle is completed, the

symbol flashes on the display and the

acoustic signal sounds intermittently for 1

minute.

If you do not turn off the

appliance, the crease guard

phase starts. Laundry can be

removed during this phase.

To remove the laundry:

1. Push the ON/OFF button for 2

seconds to turn off the appliance.

2. Open the appliance door.

3. Remove the laundry.

4. Close the appliance door.

www.electrolux.com14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Comments to this Manuals

No comments