Electrolux EOB64201X User Manual Page 18

  • Download
  • Add to my manuals
  • Print
  • Page
    / 24
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 17
Care and cleaning
Warning! Before you clean the
appliance, switch it off. Make sure that
the appliance is cold.
Warning! Do not clean the appliance
with steam cleaners or high-pressure
cleaners.
Caution! Do not use corrosive or
scouring cleaning agents, sharp objects,
stain removers or abrasive sponges.
Warning! Do not clean the glass door
with abrasive cleaning agents or metal
scraper. Heat resistant surface of the
inner glass can damage.
Caution! If you use an oven spray,
follow the instructions from the
manufacturer.
Clean the front of the appliance with a soft
cloth with warm water and cleaning agent.
To clean metal surfaces use a usual clean-
ing agent
Clean the oven interior after each use.
Thus you can remove dirt more easily and
it does not burn on.
Clean stubborn dirt with a special oven
cleaner.
Clean all oven accessories (with a soft
cloth with warm water and cleaning agent)
after each use and let them dry.
If you have nonstick accessories, do not
clean them using an aggressive agents,
sharp edged objects or dishwasher. It can
destroy nonstick coating!
Shelf Support Rails
Removing the shelf support rails
1. Pull the front of the shelf support rail away
from the side wall.
2. Pull the rear shelf support rail away from
the side wall and remove it.
2
1
Installing the shelf support rails
Install the shelf support rails in opposite se-
quence.
Important! The rounded ends of the
shelf support rails must point to the front!
Telescopic shelf runners
To insert the telescopic shelf runners, first re-
move the shelf support rails (refer to “Re-
moving the shelf support rails”).
Installing the telescopic runners
1.
Install the telescopic shelf runners at the
back of the side wall.
2. Push the front of the telescopic shelf run-
ners to the side wall.
18 electrolux
Page view 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments