Electrolux EPH09MLIWE User Manual download pdf (Page 27)

ENGLISH 27

Explanation of buttons

Nr. Button Explanation

17 ON/OFF Press the button to switch on the unit. Press the button again

to switch off the unit.

18 MODE Press the button to set the operation mode: AUTO, COOL,

DRY, FAN and HEAT. Default setting: AUTO.

In the AUTO mode, the temperature is not shown. In HEAT

mode, the initial value is 28 °C (82 °F). In other modes, the

initial value is 25 °C (77 °F).

19 FAN Press the button to set the fan speed: AUTO, LOW, MEDIUM

LOW, MEDIUM, MEDIUM HIGH and HIGH. Default setting:

AUTO. In the DRY mode, only LOW can be set.

20 UP ^ Press the button to increase the temperature. Keep the

button pressed for two seconds to accelerate the process.

Release the button to set the temperature and send the order

that the °C/°F signal will be displayed constantly.

Temperature range: 16-30 °C (61-86 °F).

In AUTO mode, the temperature cannot be set. If you press

the UP or DOWN button, a beep will sound.

21 DOWN v Press the button to decrease the temperature. Keep the

button pressed for two seconds to accelerate the process.

Release the button to set the temperature and send the order

that the °C/°F signal will be displayed constantly.

Temperature range: 16-30 °C (61-86 °F).

In AUTO mode, the temperature cannot be set, but the order

can be sent by pressing the button.

22 CLOCK Press the button to set the clock. If the clock symbol blinks,

press the UP or DOWN button to set the time. Keep the

button pressed for two seconds to accelerate the process.

Press the CLOCK button again to set the clock. The clock

symbol stops blinking.

After battery replacement, “12:00 PM” will be shown. If the

clock symbol is visible, the actual time will be shown. If the

clock symbol is not visible, the timer will be shown.

23 LIGHT Press the button to switch the display of the indoor unit on or

off. Default setting: OFF.

24 TURBO In COOL or HEAT mode, press the button to enable or

disable the turbo function. If the turbo function is enabled, the

turbo symbol will be shown. Default setting: OFF.

If the turbo function is enabled, the unit will operate at turbo

speed to cool or heat rapidly so that the ambient temperature

approaches the set temperature as soon as possible.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 91 92

Comments to this Manuals

No comments

Electrolux EPH09MLIWE User Manual Page 27

Comments to this Manuals

Related products and manuals for Unknown Electrolux EPH09MLIWE