18
Defrosting
Frost is automatically eliminated from the evaporator
of the refrigerator compartment every time the motor
compressor stops, during normal use. The defrost
water drains out through a trough into a special
container at the back of the appliance, over the
motor compressor, where it evaporates.
It is important to periodically clean the defrost
water drain hole in the middle of the refrigerator
compartment channel to prevent the water
overflowing and dripping onto the food inside.
Use the special cleaner provided, which you will
find already inserted into the drain hole.
MAINTENANCE
Periods of non-operation
When the appliance is not in use for long periods,
take the following precautions:
remove the plug from the wall socket;
remove all food;
defrost and clean the interior and all accessories;
leave the door ajar to allow air to circulate to prevent
unpleasant smells.
Interior light
If it becomes necessary to replace the lamp, press
on the rear hook and at the same time
slide the cover in the direction indicated by the arrow.
Attention:
Replace the lamp with one of the same power (the
maximum power is shown on the light diffuser).
Unplug the appliance before carrying out
any maintenance operation.
Warning
This appliance contains hydrocarbons in its cooling
unit; maintenance and recharging must therefore
only be carried out by authorized technicians.
Periodic cleaning
Many proprietary kitchen surface cleaners
contain chemicals that can attack/damage the
plastics used in this appliance. For this reason it
is recommended that the outer casing of this
appliance is only cleaned with warm water with a
little washing-up liquid added.
Clean the inside with warm water and bicarbonate of
soda.
Rinse and dry thoroughly.
Clean the condenser (black grill) and the
compressor at the back of the appliance with a
brush or a vacuum cleaner. This operation will
improve the performance of the appliance and save
electricity consumption.
Important:
Never use sharp metal tools to scrape off frost
from the evaporator as you could damage it.
Do not use a maechanical device or any artificial
means to speed up the thawing process other
than those recommended by the manufacturer.
59
Vejledning for helt indbygget skab
Apparatet leveres enten med døre som kan
højre- eller venstreåbnes. Man kan
forandre dørens åbningsside ved at udføre
følgende handlinger, inden apparatet
installeres:
1. Løsn den øverste stift og fjern afstandsstykket.
2. Fjern den låge.
3. Løsn den nederste stift og fjern afstandsstykket.
Montér herefter delene på den modsatte side.
4. Anbring den låge på ny og fastspænd den
øverste stift og afstandsstykket på den modsatte
side.
Vejledning for helt indbygget skab
Indbygningsdimensioner:
Højde (1) 1780 mm
Dybde (2) 550 mm
Bredde (3) 560 mm
Følg anvisningerne på Fig. , således at der sikres
tilstrækkelig ventilation.
Comments to this Manuals