Electrolux ESF43020 User Manual download pdf (Page 30)

3. Fully clean the parts with water.

4. Put the two parts of the filter (A) togeth-

er and push. Make sure that they en-

gage correctly in each other.

5. Remove the filter (B).

6. Fully clean the filter (B) with water.

7. Put the filter (B) to its initial position.

Make sure that it engages correctly in

the two guides (C).

8. Put the filter (A) into position in filter (B).

Turn the filter (A) clockwise until it locks.

To clean the spray arms

Do not remove the spray arms.

If the holes in the spray arms become clog-

ged, remove remaining parts of soil with a

thin pointed object.

To clean the external surfaces

Clean the external surfaces of the appliance

and control panel with a moist soft cloth.

Only use neutral detergents.

Do not use abrasive products, abrasive

cleaning pads or solvents (acetone).

WHAT TO DO IF…

The start of the appliance does not occur or

it stops during operation.

First try to find a solution to the problem (re-

fer to the table). If not, contact the service

centre.

With some malfunctions the indicators

flash to show an alarm code.

Alarm code Malfunction

• The start/cancel indicator flashes continuously.

• The end indicator flashes one time intermittently.

The appliance does not fill with water.

• The start/cancel indicator flashes continuously.

• The end indicator flashes two times intermittently.

The appliance does not drain the water.

• The start/cancel indicator flashes continuously.

• The end indicator flashes three times intermittently.

The anti-flood device is on.

30 electrolux

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 71 72

No comments

Electrolux ESF43020 User Manual Page 30