
Mode Changeover
During seasons when you need HEAT-
ING at night and COOLING at daytime ,
or if the room temperature should be-
come extremely higher than the temper-
ature setting, due to supplementary
heating equipment, the mode will auto-
matically switch between HEAT and
COOL mode to keep the comfortable
room temperature.
Adjusting vertical air flow direction
1.
Press the SWING button (
) on the re-
mote control once.
– The vertical adjustment louvre will
swing continuously.
2.
Press the SWING button (
) again when
the vertical adjustment louvre is at the de-
sired position.
– The louvre will stop moving within the
range shown in the diagram.
CLEAN
10 deg
FAN
SET/C
OFF 1HR
SWING
CLOCK
SET
TIME ADJUST
TIMER
ON
TIMER
OFF
MODE
TIMER
1
2
Adjustment range
HEAT mode
COOL and DRY
modes
Adjusting horizontal air flow direction
1.
Press the SWING button (
) on the re-
mote control once.
– The horizontal adjustment louvres will
swing continuously.
2.
Press the SWING button (
) again when
the horizontal adjustment louvres are at
the desired position.
CLEAN
10 deg
FAN
SET/C
OFF 1HR
SWING
CLOCK
SET
TIME ADJUST
TIMER
ON
TIMER
OFF
MODE
TIMER
1
2
• The adjusted position will be memorized
and will be automatically set to the same
position when operated the next time.
• The adjustment range is narrower than the
SWING range in order to prevent conden-
sation from dripping.
electrolux 11
Comments to this Manuals