Electrolux GA60LI220 User Manual download pdf (Page 16)

Problem Possible cause Possible solution

The filters are dirty or not as-

sembled and installed correctly.

Make sure that the filters are

clean and correctly assembled

and installed.

The quantity of detergent was

not sufficient or missing.

Make sure that the quantity of

detergent is sufficient.

Limescale particles on the

dishes.

The salt container is empty. Fill the salt container with dish-

washer salt.

Incorrect level of the water soft-

ener adjustment.

Adjust the water softener with

the correct level.

The salt container cap is not

closed correctly.

Make sure that the salt contain-

er cap is closed correctly.

There are streaks, whitish

stains, or a bluish layer on

glasses and dishes.

The rinse aid quantity is too

high.

Decrease the rinse aid quantity.

Dry water drop stains on

glasses and dishes.

The rinse aid quantity is too

low.

Increase the rinse aid quantity.

The detergent can be the

cause.

Use a different brand of deter-

gent.

The dishes are wet. The washing programme was

without a drying phase or with

a decreased drying phase.

For better drying results, keep

the door ajar for some minutes.

The dishes are wet and matt. The rinse aid dispenser is emp-

ty.

Fill the rinse aid dispenser with

rinse aid.

The multitab function is on (this

function automatically deacti-

vates the rinse aid dispenser).

Activate the rinse aid dispenser.

Activating the rinse aid dispenser

1. Activate the appliance. Make sure that

the appliance is in setting mode.

2. Press and hold function button (B) and

function button (C) at the same time un-

til the programme indicators above

function buttons (A), (B), and (C) start to

flash.

3. Release function button (B) and function

button (C).

4. Press function button (B).

• The programme indicators above

function button (A) and function but-

ton (C) go off.

• The programme indicator above func-

tion button (B) continues to flash.

• The display shows the setting of the

rinse aid dispenser.

The rinse aid dis-

penser is deactiva-

ted.

The rinse aid dis-

penser is activated.

5. Press function button (B) to change the

setting.

6. Deactivate the appliance to confirm.

TECHNICAL DATA

Dimensions Width 596 mm

Height 818 - 898 mm

Depth 575 mm

Water supply pressure Minimum 0.5 bar (0.05 MPa)

Maximum 8 bar (0.8 MPa)

16 electrolux

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 67 68

Comments to this Manuals

No comments

Electrolux GA60LI220 User Manual Page 16

Comments to this Manuals

Related products and manuals for Unknown Electrolux GA60LI220