Electrolux ZA1 User Manual download pdf (Page 4)

Connection

terminals

Display

Roller

Drive wheel

Rating plate Roller cover

lock button

Trilobite

Trilobite navigates using ultrasound. During Wall Mapping, it

receives information about the size of the room.Wall mapping

serves as the basis for the estimated duration for independent

vacuuming in the Normal vacuuming mode.

NOTE! Trilobite is not fully charged upon delivery.

Before using it the first time, connect it to the battery charger.

(Refer page 40.) A full battery charge requires approximately

two hours.

Battery charger

Put the battery charger on the floor, connect it to the mains and

place it with its rear side facing the wall.Allow a free space of 0.2

metres on the right side of the charger.When Trilobite has com-

pleted Normal vacuuming, it returns to the charger.The batteries

are then charged and it is ready for more work.

Magnetic strips

The magnetic strips serve as “virtual walls” and are important for

correct operation. Use them to e.g., block door and wall openings

and staircases. (Refer to page 41.)

Be sure to block staircases, landings, etc. with the magnetic

strips. If you do not do this, Trilobite can pass over e.g., a staircase

landing and cause injuries and damage to property.

A magnetic strip that has once been removed has poorer adhesive

capability.We therefore strongly recommend that you attach the

necessary strips once and for all. Never reuse a magnetic strip on

a stair or in any other important application where safety is an

important parameter. If you nonetheless choose to let the magne-

tic strip lie unfastened on the floor, make sure that the side with

the adhesive (with the protective paper backing) faces down-

wards! Use a pair of scissors or a knife to trim the magnetic strip

to the correct length. See page 41 in the user instructions to see

how the magnetic strip should be fitted. Magnetic strips are avail-

able in a range of lengths and versions, see page 48.

Emptying the dust collector

Empty the dust collector when the dust collector icon lights

in the display. Be sure to empty the dust collector if it is not

completely full.The light indicator may be due to e.g., a

blocked filter.

Self-adhesive magnet stripBattery charger

Handle

Flexible bumper

Filter lid

lock button

Terminals for

connection

to charger

1 2 3 4 5 6 7 8 9 ... 15 16

Comments to this Manuals

No comments

Electrolux ZA1 User Manual Page 4

Comments to this Manuals

Related products and manuals for Unknown Electrolux ZA1