Electrolux EWX12540W User Manual download pdf (Page 17)

use electrolux 17

After about a few minutes the door can be

opened (pay attention to the water

level and temperature!).

At the end of the programme

The machine stops automatically. The

buzzer sounds. Three flashing zeros

«

0.00« will appear on the display, the

light of button and the pilot light

go off : the door can be opened.

If the Night Cycle

or the

Rinse Hold

option has been selected, the pilot light

remains alight and the door locked

to indicate that the water must be

empty out before opening the door.

To empty out the water:

● turn the programme selector dial to

«O»

● Select Drain or Spin programme

● reduce the spin speed if needed, by

pressing the relevant button

● press button

● at the end of the programme, the

display shows 3 flashing zeros

«0.00». The door can be opened.

At the end of the cycle, turn the

programme selector dial to «O»to

switch the machine off.

Remove the laundry from the drum and

carefully check that the drum is empty.

If you do not intend to carry out

another wash, close the water tap.

Leave the door open to prevent the

formation of mildew and unpleasant

smells.

8

9

98

Use - Drying

Drying only

Warning! Do not exceed the following

laundry loads:

- 2.5 kg for linen and cottons

- 1.5 kg for synthetics

The water tap must be open and

the drain hose must be positioned

in the sink or connected to the

drain pipe.

1. Load the laundry.

2. Select the drying programme (for

Cottons or Synthetics in the Drying

sector).

3. Press button until the time you

want appears on the display (see

the drying programmes). Every time

you press this button the drying time

increases by 5 mins.

Note!

The programme time will automatically

increase by up to 2 minutes, this is

quite normal.

4. Press button to start the pro-

gramme.

After the programme has started, the

time remaining is updated every minute.

5. At the end of the programme, the

buzzer sounds. Three flashing zeros

«

0.00» appear on the display.

The last 10 minutes of the drying

cycle correspond to an anti-crease

phase. During this time the pilot light

is alight, the door is locked and

the display keeps showing three

flashing zeros «0.00».

9

8

5

132966410_GB.qxd 10/01/2008 9.34 Pagina 17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 43 44

Comments to this Manuals

No comments