Electrolux EWX147410W User Manual download pdf (Page 27)

4. Slide out the relevant plastic spacers.

5. Fill the smaller upper hole and the two

large ones with the corresponding plas-

tic plug caps supplied in the bag con-

taining the instruction booklet.

POSITIONING

Install the machine on a flat hard floor.

Make sure that air circulation around the

machine is not impeded by carpets, rugs

etc. Check that the machine does not

touch the wall or other kitchen units. Level

the washing machine by raising or lowering

the feet. The feet may be tight to adjust as

they incorporate a self locking nut, but the

machine MUST be level and stable. If nec-

essary, check the setting with a spirit level.

Any necessary adjustment can be made

with a spanner.

Accurate levelling prevents vibration, noise

and displacement of the machine during

operation.

Caution! Never place cardboard,

wood or similar materials under the

machine to compensate for any

unevenness in the floor. After having

levelled the appliance, tighten the lock

nuts.

RAISING THE APPLIANCE

Suspended wooden floors are particularly

susceptible to vibration.

To help prevent vibration we recommend

you place a waterproof wood panel, at least

15 mm thick under the appliance, secured

to at least 2 floor beams with screws, the

wood panel must extend beyond the front

feet.

If possible install the appliance in one of the

corners of the room, where the floor is

more stable.

WATER INLET

An inlet hose is supplied and can been

found inside the machine drum. Do not use

the hose from your previous machine to

connect to the water supply.

Important! This appliance must be con-

nected to a cold water supply.

1. Open the porthole and extract the inlet

hose.

electrolux 27

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 35 36

Comments to this Manuals

No comments