Electrolux EKG5543 User Manual download pdf (Page 17)

CARE AND CLEANING

Before cleaning always allow the appliance

to cool down before switching off at the

electricity supply.

CLEANING MATERIALS

Before using any cleaning materials on your

appliance, check that they are suitable and that their

use is recommended by the manufacturer.

Cleaners that contain bleach should NOT be used

as they may dull the surface finishes. Harsh

abrasives must also be avoided.

CLEANING THE OUTSIDE OF THE

APPLIANCE

Do not use abrasive cleaning materials e.g. Hob

Brite, Brillo pads or scourers on painted or printed

finishes as damage may occur. Regularly wipe over

the control panel, doors and appliance sides using a

soft cloth and hot soapy water. To prevent streaking

finish with a soft cloth.

Stainless Steel cream cleaners are abrasive and

should be avoided as they may dull the surface

finish. Any spillage on the stainless steel finish

must be wiped off immediately.

Do not attempt to remove any of the

control knobs from the appliance as this

may cause damage and is a safety hazard.

CLEANING THE CONTROL KNOBS AND

HANDLES

It is strongly recommended that only hot soapy water

is used for cleaning the control knobs and handles.

ANY OTHER CLEANING MATERIALS MAY DULL

THE SURFACE FINISH.

REMOVING AND REPLACING THE

WIREWORK RUNNERS

1. Remove all shelves and furniture from the oven.

2. Hold the wirework at the bottom, unclip from the

cavity side and gently pull towards the centre of

the oven.

3. Unhook the runner at the top and remove from

the cavity.

4. To replace the runners, hook the wirework side

runner into the cavity, slide back and press into

place.

Ensure the wirework runners are firmly in

position before replacing the oven

shelves.

CAVITY

CENTRE

SIDE PANEL

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

Comments to this Manuals

No comments

Electrolux EKG5543 User Manual Page 17

Comments to this Manuals

Related products and manuals for Cookers Electrolux EKG5543